Brought to you from RS Pro, this power cable consists of an angled European Type F - Schuko plug adjoining an IEC C19 socket. This power cable assembly is typically used in higher current IT applications such as power distribution units, servers and large network routers.
For mating with chassis plugs see stock no.295-8737.
Features and Benefits:
• H05W-F Cable
• 16A C19 Connector
• Built in strain relief at either end of cable
CEE7/7, IEC 320 std C19, EN60 320 std 19
Jumper Cord C20 Plug to C19 Connector with IEC Lock. The design allows a quick secure connection for the C19 end to any C20 Inlet or Plug. Prevent inadvertent disconnects with the patented IEC-LOCK. The elegance of the solution is that NO proprietary mating inlet or plug is required. Power cord commonly used between a high-end PDU and Server is a data cabinet.
APC AP9892 16A 100-230V IEC-320 C19-C20 Power Cable
APC offers power cords (also known as jumper cords), which provide connector options to fulfill a variety of power requirements. Use these power cords to connect your equipment to an APC Rack-Mount power distribution unit (PDU)/outlet strip, MasterSwitch product, Automatic Transfer Switch (ATS), or UPS. These power cords can also be used to connect your APC Rack-Mount (PDU)/Outlet Strip to a power source, such as an APC UPS, ATS, or separate branch circuit.
Jumper Cord C14 Plug to C19 Connector with SJT jacket. The C20 male inlet is common to many server computers. The C13 female outlet is common on many PDU strips. In data environments keep the length of cords to a minimum to avoid contact with Ethernet cables and reduce power loss. 14 gauge cord yields the max amperage for this cord up to 50 feet.
Data Comms Direct offers a huge range of UK Mains Plug to IEC C13 female leads also known as Kettle Leads. All available from our warehouse for prompt delivery.
Cable Make Up:
Three pin UK Male with a Female IEC/EN60320/C13 Connector (10/15 Amp). Has either 3 x 0.75MM or 3 x 1.00MM H05VV-F Cable. RoHS Compliant. The IEC C13 is oftened referred to as a Kettle Connection.
All cables detailed on this page are of a moulded construction.
Call us for custom lengths, colours, conductor size or bulk orders (100s).
Approved by BSI to BS1363/A
Brought to you by RS Pro, this cordset consists of a European mains plug moulded to a harmonised cable with a CEE 22 (IEC C13) socket moulded to the other end. The C13 connector is used in various devices, including computer monitors, kitchen appliances and amplifiers. All models are highly reliable and excellent quality.
Available in this range:
• Stock Number 731-6201 features a Swiss standard mains plug specifically for use with Swiss sockets.
• Stock Number 317-327 features three pronged Italian plugs for use with Italian sockets.
PC power cord. Male plug inserts into a NEMA 5-15 outlet or receptacle. Female connector attaches to an IEC 60320 C14 male inlet. For this NEMA receptacle 14 gauge cords yield the maximum amperage and are rated for 15 amps up to 50 feet in length. In data environments keep the length of cords to a minimum to avoid contact with Ethernet cables and reduce power loss.
KWX-ATS-16A8x2-H1C20 Rack mount Automatic Transfer Switch, is a new generation of Intelligent Automatic Transfer Switch. It combines network power ...
C13-C14 Right angle
Jumper Cord C14 Right Angled Plug to C13 Connector red color and 18 gauge. The angle allows for routing cable in tight spaces. Power cord commonly used between a PDU and Computer in a data cabinet. When employing two power strips in a rack for redundancy consider using a C14 Left Angled plug for the connection to the opposite side power strip.
Jumper Cord C14 Plug to C13 Connector with SJT jacket. Power cord commonly used between a PDU and Computer in a data rack or cabinet. In data environments keep the length of cords to a minimum to avoid contact with Ethernet cables and reduce power loss. 14 gauge cord yields the max amperage for this cord up to 50 feet.